A vapor barrier for cold testing printed circuit cards

Cold testing method prevents formation of frost on printed circuit boards and part holders during testing at sub-zero temperatures. Freon permits rapid attainment of the required testing temperature

Hysteresis and Post Walrasian Economics

Macroeconomics, hysteresis The “new consensus” dsge (dynamic stochastic general equilibrium) macroeconomic model has microfoundations provided by a single representative agent. In this model shocks to the economic environment do not have any lasting effects. In reality adjustments at the micro level are made by heterogeneous agents, and the aggregation problem cannot be assumed away. In this paper we show that the discontinuous adjustments made by heterogeneous agents at the micro level mean that shocks have lasting effects, aggregate variables containing a selective, erasable memory of the shocks experienced. This hysteresis framework provides foundations for the post-Walrasian analysis of macroeconomic systems

Dual pathway spindle assembly increases both the speed and the fidelity of mitosis

Roughly half of all animal somatic cell spindles assemble by the classical prophase pathway, in which the centrosomes separate ahead of nuclear envelope breakdown (NEBD). The remainder assemble by the prometaphase pathway, in which the centrosomes separate following NEBD. Why cells use dual pathway spindle assembly is unclear. Here, by examining the timing of NEBD relative to the onset of Eg5-mEGFP loading to centrosomes, we show that a time window of 9.2 ± 2.9 min is available for Eg5-driven prophase centrosome separation ahead of NEBD, and that those cells that succeed in separating their centrosomes within this window subsequently show .3-fold fewer chromosome segregation errors and a somewhat faster mitosis. A longer time window would allow more cells to complete prophase centrosome separation and further reduce segregation errors, but at the expense of a slower mitosis. Our data reveal dual pathway mitosis in a new light, as a substantive strategy that increases both the speed and the fidelity of mitosis

Mechanochemistry of the kinesin-1 ATPase

Kinesins are P-loop NTPases that can do mechanical work. Like small G-proteins, to which they are related, kinesins execute a program of active site conformational changes that cleaves the terminal phosphate from an NTP substrate. But unlike small G-proteins, kinesins can amplify and harness these conformational changes in order to exert force. In this short review I summarize current ideas about how the kinesin active site works and outline how the active site chemistry is coupled to the larger-scale structural cycle of the kinesin motor domain. Focusing largely on kinesin-1, the best-studied kinesin, I discuss how the active site switch machinery of kinesin cycles between three distinct states, how docking of the neck linker stabilizes two of these states, and how tension-sensitive and position-sensitive neck linker docking may modulate both the hydrolysis step of ATP turnover and the trapping of product ADP in the active site. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 476–482, 2016

The Influence of ZnO Layer Thickness on the Performance and Electrical Bias Stress Instality in ZnO Thin Film Transistors

University of Buea supported the first author during the writing of this manuscript Open access articleThin Film Transistors (TFTs) are the active elements for future large area electronic applications, in which low cost, low temperature processes and optical transparency are required. Zinc oxide (ZnO) thin film transistors (TFTs) on SiO2/n+-Si substrate are fabricated with the channel thicknesses ranging from 20 nm to 60 nm. It is found that both the performance and gate bias stress related instabilities of the ZnO TFTs fabricated were influenced by the thickness of ZnO active channel layer. The effective mobility was found to improve with increasing ZnO thickness by up to an order in magnitude within the thickness range investigated (20 – 60 nm). However, thinner films were found to exhibit greater stability in threshold voltage and turn-on voltage shifts with respect to both positive and negative gate bias stress. It was also observed that both the turn on voltage (Von) and the threshold voltage (VT) decrease with increasing channel thickness. Moreover, the variations in subthreshold slope (S) with ZnO thickness as well as variations in VT and Von suggest a possible dependence of trap states in the ZnO on the ZnO thickness. This is further correlated by the dependence of VT and Von instabilities with gate bias stress

Studies of surface two-dimensional photonic band-gap structures

Two-dimensional (2D) surface photonic band-gap (SPBG) structures can be obtained by providing a shallow corrugation of the inner surface of a waveguide wall. It can be used as a distributed mirror, a cavity, or a filter in integrated optics or microwave electronics. These structures can also be an alternative to conventional 2D PBG or 1D Bragg structures. In this article, we present the results of theoretical and experimental studies of 2D SPBG structures. Data obtained from experiments are compared with theoretical results and good agreement between theory and experiment is demonstrated. Comparison of a coaxial 2D SPBG structure with a conventional 1D Bragg structure is also presented

Domain Coarsening in Systems Far from Equilibrium

The growth of domains of stripes evolving from random initial conditions is studied in numerical simulations of models of systems far from equilibrium such as Rayleigh-Benard convection. The scaling of the size of the domains deduced from the inverse width of the Fourier spectrum is studied for both potential and nonpotential models. The morphology of the domains and the defect structures are however quite different in the two cases, and evidence is presented for a second length scale in the nonpotential case.Comment: 11 pages, RevTeX; 3 uufiles encoded postscript figures appende

Cylindrical, periodic surface lattice — theory, dispersion analysis, and experiment

A two-dimensional surface lattice of cylindrical topology obtained via perturbing the inner surface of a cylinder is considered. Periodic perturbations of the surface lead to observation of high-impedance, dielectric-like media and resonant coupling of surface and non-propagating volume fields. This allows synthesis of tailored-for-purpose "coating" material with dispersion suitable, for instance, to mediate a Cherenkov type interaction. An analytical model of the lattice is discussed and coupled-wave equations are derived. Variations of the lattice dispersive properties with variation of parameters are shown, illustrating the tailoring of the structure's electromagnetic properties. Experimental results are presented showing agreement with the theoretical model

Gyrotron experiments employing a field emission array cathode

The design and operation of a field emission array (FEA) cathode and the subsequent demonstration of the first FEA gyrotron are presented. Up to 10 mA from 30 000 tips was achieved reproducibly from each of ten chips in a gyrotron environment, namely, a vacuum 1 x 10(-8) mbar, -50 kV potential with multiple chip operation, The design parameters of the FEA gun were similar to those of a magnetron injection gun with an achievable electron beam current of 50-100 mA and measured power 720 W cw. Coherent microwave radiation was detected in both TE(02) at 30.1 GHz and TE(03) at 43.6 GHz, with a starting current of 1 mA